How can I manually set fans speed for SB122A-PH systems?


A: Disable smart fan Remote:ipmitool -I lanplus -H 192.168.1.xx -U admin -P admin raw 0x3C 0x1D 0 Locat: ipmitool raw 0x3C 0x1D 0 00 --------------------------------------------- Set PWM value to all fan ipmitool -I lanplus -H 192.168.1.xx -U admin -P admin raw 0x3A 0x19 0 0 30 ipmitool -I lanplus -H 192.168.1.xx -U admin -P admin raw 0x3A 0x19 0 1 30 ipmitool -I lanplus -H 192.168.1.xx -U admin -P admin raw 0x3A 0x19 0 2 30 ipmitool -I lanplus -H 192.168.1.xx -U admin -P admin raw 0x3A 0x19 0 3 30 ipmitool -I lanplus -H 192.168.1.xx -U admin -P admin raw 0x3A 0x19 0 4 30 ipmitool -I lanplus -H 192.168.1.xx -U admin -P admin raw 0x3A 0x19 0 5 30 The last byte 30 means 30% PWM, the range is 1-100 Other example: ipmitool -I lanplus -H 192.168.1.xx -U admin -P admin raw 0x3A 0x19 0 0 70 Set fan group 0 pwm 70% ipmitool -I lanplus -H 192.168.1.xx -U admin -P admin raw 0x3A 0x19 0 3 70 Set fan group 3 pwm 70% ------------------------------------------------------------------------------------------ After test finish, remember to enable smart fan Enable smart fan Remote: ipmitool -I lanplus -H 192.168.1.xx -U admin -P admin raw 0x3C 0x1D 1 Local: ipmitool raw 0x3C 0x1D 1
Last update:
2017-01-30 18:53
Author:
Johnny Chiang
Revision:
1.0
Average rating:0 (0 Votes)

You cannot comment on this entry

Chuck Norris has counted to infinity. Twice.

Records in this category

Tags